FDLE Electromagnetic Flowmeter


Intelligent Electromagnetic Flowmeter Description
FDLE Electromagnetic flowmeter can be used to measure the volume flow of conductive fluid in a closed pipeline. It is widely applied in the flow measurement and control in the fields of chemical and petroleum industry, metallurgy industry, water and waste water, agriculture and irrigation, paper making, food and beverage industry and pharmaceutical industry.
Product Feature
Working Principles
The measuring principle of electromagnetic flowmeter is based on the electromagnetic induction law of Farady. The sensor is mainly composed of measuring tube with isolate lining, a pair of electrodes installed by penetration of the measuring tube wall, a pair of coils and iron core to produce working magnetic field. When the conductive fluid flows through the measuring tube of the sensor, the voltage signal in direct proportion to the average flow velocity of the fluid.






Intelligent Electromagnetic Flowmeter Description
FDLE Electromagnetic flowmeter can be used to measure the volume flow of conductive fluid in a closed pipeline. It is widely applied in the flow measurement and control in the fields of chemical and petroleum industry, metallurgy industry, water and waste water, agriculture and irrigation, paper making, food and beverage industry and pharmaceutical industry.
Product Feature
- Measurement is not affected by the variation of flow density, viscosity, temperature,pressure and conductivity. High accuracy measurement is guaranteed according to the linear measurement principle.
- No obstacle in the pipe, no pressure-loss and lower requirement for straight pipeline.
- DN 6 to DN2000 covers a wide range of pipe size. A variety of liners and electrodes are available to satisfy different flow characteristic.
- Programmable low frequency square wave field excitation, improving measurement stability and reducing power consumption.
- Implementing 16 bits MCU, providing high integration and accuracy; Full-digital processing, high noise resistance and reliable measurement; Flow measurement range up to 1500:1.
- High definition LCD display with backlight.
- RS485 or RS232 interface supports digital communication.
- Intelligent empty pipe detection and electrodes resistance measurement diagnosing empty pipe and electrodes contamination accurately.
- SMD component and surface mount technology (SMT) are implemented to improve the reliability.
Model | FDLE Electromagnetic Flowmeter |
DN size | DN10~DN2000mm |
Accuracy | 0.5%, 0.2% |
Medium Conductivity | ≥5uS/cm |
Flow Rate | 0.3-12m/s |
Nominal Pressure | 4.0MPa(DN0-150) 1.6MPa(DN200-600) 1.0MPa(DN700-1200) 0.6MPa(DN400-2000) Or other specified by order |
Ambient Temperature | Sensor: -25ºC to + 60ºC; Converter: -25ºC to + 60 |
Relative Humidity | 5% to 90%; |
Medium Temperature | Compact Type: 80ºC Remote Type:Teflon 150ºC,Neoprene 80ºC; 120ºC,Polyurethane 70ºC |
Lining Material | Polyurethane,Neoprene,PTFE,PFA etc |
Electrode Material | SS316,Hastelloy C, Titanium, Tantalum,Platinum |
Power Supply | AC110/220(AC 85-265V),50/60Hz;24VDC(DC11-40V) |
Power Consumption | ≤10VA |
Protection Level | IP65,IP67,IP68 |
Digital Communication | RS485, RS232, MODBUS |
Output Signals | Current output,Frequency output,Pulse output |
Housing Material | Carbon steel,Stainless steel |
Flange Material | Carbon steel,Stainless steel |
Electrical Connection | Cable entry hole M20x1.5, Φ10,Φ12 |
Working Principles
The measuring principle of electromagnetic flowmeter is based on the electromagnetic induction law of Farady. The sensor is mainly composed of measuring tube with isolate lining, a pair of electrodes installed by penetration of the measuring tube wall, a pair of coils and iron core to produce working magnetic field. When the conductive fluid flows through the measuring tube of the sensor, the voltage signal in direct proportion to the average flow velocity of the fluid.



